Practice Quiz

CompTIA Server+ - Question List

Select how would you like to study

Study Mode Free Daily Question Test Mode
51. David has installed multiple processors on his computer. However, the system recognizes only one processor. Which of the following could be the possible cause of this issue?
  1. Processor speed mismatch
  2. Additional VRMs are not used
  3. Empty processor slots do not have terminator resistor packs.
  4. The OS is not configured to use multiple processors.
See answer
52. John is administering a set of servers in his organization. One of the drives in a RAID-5 disk array fails. From a business standpoint, John cannot shut down the server to replace the hard drive. What else can he do to fix this issue?
  1. Update the driver for the bad hard drive.
  2. Swap the drive through the hot-swapping method.
  3. Re-install the driver for the bad hard drive.
  4. Shut down the server and swap the hard drive.
See answer
53. Janet has been using her computer for over a year now. Currently, she is facing a problem with an incorrect date and time set on her computer. She has tried to rectify it several times, but is not able to fix it. Which of the following could fix her problem?
  1. Replacing the CMOS battery
  2. Replacing the motherboard
  3. Replacing the video card
  4. Re-installing the operating system
See answer
54. You are trying to troubleshoot a monitor that has a dead screen. The brightness and contrast controls are turned up and you now want to check if the monitor display is working. What should you do?
  1. Clean the screen with a dry cloth.
  2. Switch ON the computer and feel the static on the screen.
  3. Clean the screen with a wet cloth.
  4. Switch OFF and then switch ON the monitor.
See answer
55. John is managing a server that has four internal hard drives. POST only indicates that two HDDs are installed. Which of the following could be the most likely cause of this issue?
  1. Two of the four are SCSI hard drives.
  2. Disks are configured in two separate RAID arrays.
  3. Disks are configured in a RAID 1 mirrored array.
  4. Disks are configured in a RAID 0 striped array.
See answer

Select how would you like to study

Study Mode Free Daily Question Test Mode