Red Seal Construction Electrician - Question List

Select how would you like to study

46.
An aerial work platform is required to complete a task. Which of the following is not required?
  1. The worker operating the equipment and any passengers must have valid aerial work platform training.
  2. The worker operating the equipment and any passengers must have valid fall arrest training.
  3. Inspected fall arrest PPE must be worn at all times while operating the aerial work platform, even while driving the equipment with the boom retracted.
  4. The equipment must be inspected at the beginning of each day’s use and if the operator of the equipment changes.
47.
What is the maximum spacing permitted between supports for trade size 21 rigid metal conduit?
  1. 3m
  2. 2m
  3. 1.5m
  4. 0.9m
48.
When assembling a raceway system, when is it permissible for a section of the raceway to be supported by other parts of the raceway?
  1. When the raceway being supported is less than 3.0m from an independent support.
  2. When the raceway providing support is properly supported by independent supports.
  3. When there are no available independent supports and the total raceway length is less than 3.0m.
  4. Never.
49.
Pendant luminaires installed in a zone 1 location suspended by rigid metal conduit must:
  1. Be installed using rigid steel conduit only.
  2. Not be installed with a stem longer than 300mm.
  3. Be provided with a set screws or other means to prevent loosening.
  4. Be provided with an independent supporting means.
50.
A pendant ceiling fan weighing less than 16 kg may be installed using a ceiling outlet box provided that:
  1. The outlet box is secured to the structure of the installation with at least two 3” x #10 wood screws.
  2. The outlet box is marked for fan support.
  3. The outlet box is marked heavy duty.
  4. The outlet box is a minimum 1 1/2” deep octagon box.

Select how would you like to study