CompTIA Server+ - Question List

Select how would you like to study

11. David wants to check the maximum transfer rate of his network. Which of the following counters should he use from the network interface bottleneck monitoring tool?
  1. Packets Outbound Discarded
  2. Output Queue Length
  3. Bytes Total/sec
  4. Current Bandwidth
12. Which of the following hard drive parameters indicate the symptoms of a server bottleneck?
  1. Percentage disk time greater than 50% and Avg. Read Queue Length of 4
  2. Percentage disk time greater than 50% and Avg. Read Queue Length of 3
  3. Percentage disk time greater than 40% and Avg. Read Queue Length of 4
  4. Avg. Write Queue Length of 1 and Avg. Read Queue Length of 4
13. David wants to verify whether a host on his network can connect to the internet. Which of the following utilities should he use?
  1. TRACERT
  2. NETSTAT
  3. NBTSTAT
  4. PING
14. Which of the following TCP/IP tool returns specifies the details of each path-hop over the network to a specific destination?
  1. PING
  2. TRACERT
  3. NETSTAT
  4. IPCONFIG
15. John is using a POST card to diagnose a hardware issue on the server. Which of the following POST card operational modes should he use to enable the POST card to initialize itself, without assistance from the server board's BIOS?
  1. Basic diagnostics mode
  2. Extended diagnostics mode
  3. Forced start mode
  4. Self start mode

Select how would you like to study