Question 1

Traction control

Accepted Answer

A system that helps prevent wheel slippage and loss of control during acceleration.

Question 2

Throttle

Accepted Answer

The control lever or twist grip used to regulate the engine speed.

Question 3

Countersteering

Accepted Answer

The technique of pushing on the handlebar in the opposite direction to initiate a turn.

Question 4

ABS

Accepted Answer

Anti-lock Braking System, a safety feature that prevents wheel lock-up during braking.

Question 5

Apex

Accepted Answer

The point on a turn where the motorcycle is closest to the inside of the curve.

Question 6

Camber

Accepted Answer

The slope or tilt of the road surface, which can affect motorcycle stability.

Question 7

Counterbalance

Accepted Answer

A weight or mechanism used to reduce engine vibrations.

Question 8

Pillion

Accepted Answer

A seat or footrest for a passenger on a motorcycle.

Question 9

Saddlebags

Accepted Answer

Bags attached to the sides of a motorcycle for storage.

Question 10

Rev limiter

Accepted Answer

A device that prevents the engine from exceeding a certain speed.

Question 11

Lane splitting

Accepted Answer

Riding a motorcycle between two lanes of stopped or slow-moving traffic.

Question 12

Lane position

Accepted Answer

The placement of a motorcycle within a lane for optimal visibility and safety.

Question 13

Apex

Accepted Answer

The point on a turn where the motorcycle is closest to the inside of the curve.

Question 14

U-turn

Accepted Answer

A maneuver in which the motorcycle makes a 180-degree turn to travel in the opposite direction.

Question 15

Filtering

Accepted Answer

Riding a motorcycle between lanes of slow or stopped traffic.

Question 16

Trail braking

Accepted Answer

Applying the brakes while entering a turn to adjust speed and control.

Question 17

Target fixation

Accepted Answer

A phenomenon where riders tend to steer towards an object they focus on.

Question 18

Drag coefficient

Accepted Answer

A measure of a motorcycle's aerodynamic resistance.

Question 19

Windscreen

Accepted Answer

A shield or fairing designed to protect the rider from wind and debris.

Question 20

Bank angle

Accepted Answer

The angle at which a motorcycle leans during a turn.

Question 21

Throttle response

Accepted Answer

The speed at which the engine responds to changes in throttle input.

Question 22

Forks

Accepted Answer

The front suspension of a motorcycle, consisting of two tubes that hold the front wheel.

Question 23

Camshaft

Accepted Answer

A rotating shaft that operates the valves in an internal combustion engine.

Question 24

Clutch lever

Accepted Answer

The lever used to engage and disengage the clutch.

Question 25

Chain drive

Accepted Answer

A method of transferring power from the engine to the rear wheel using a chain.

Question 26

Foot pegs

Accepted Answer

Platforms on a motorcycle where the rider's feet rest.

Question 27

Spark plug

Accepted Answer

A device that ignites the air-fuel mixture in the combustion chamber.

Question 28

Center of gravity

Accepted Answer

The point at which the weight of an object is evenly distributed.

Question 29

Fuel injection

Accepted Answer

A system that delivers fuel to the engine in a controlled manner.

Question 30

Camber angle

Accepted Answer

The angle at which the wheels of a motorcycle lean inward or outward.

Question 31

Carburetor

Accepted Answer

A device that mixes air and fuel for combustion in an internal combustion engine.

Question 32

Cast wheels

Accepted Answer

Wheels made by pouring molten metal into a mold.

Question 33

Compression ratio

Accepted Answer

The ratio of the volume of the combustion chamber at its largest to its smallest.

Question 34

Disc brakes

Accepted Answer

Brakes that use a rotating disc and caliper to stop the motorcycle.

Question 35

D.O.T.

Accepted Answer

Department of Transportation, the government agency responsible for regulating transportation.

Question 36

Fork seals

Accepted Answer

Rubber seals that prevent oil leaks from the front suspension forks.

Question 37

Fuel tank capacity

Accepted Answer

The maximum amount of fuel a motorcycle's tank can hold.

Question 38

Gear ratio

Accepted Answer

The ratio between the number of teeth on two meshing gears.

Question 39

Kickstand

Accepted Answer

A retractable metal support that keeps the motorcycle upright when parked.

Question 40

O-ring chain

Accepted Answer

A type of motorcycle chain with rubber O-rings to retain lubrication.

Question 41

Rear suspension

Accepted Answer

The system that supports the rear wheel and absorbs shocks and vibrations.

Question 42

Cam chain

Accepted Answer

A chain that connects the crankshaft and camshaft to synchronize their movement.

Question 43

Exhaust system

Accepted Answer

The system that carries waste gases from the engine out through the tailpipe.

Question 44

Fuel gauge

Accepted Answer

A device that indicates the amount of fuel remaining in the motorcycle's tank.

Question 45

Gear shift lever

Accepted Answer

The lever used to change gears on a motorcycle.

Question 46

High beam

Accepted Answer

The brighter setting of the motorcycle's headlight for increased visibility.

Question 47

Low beam

Accepted Answer

The dimmer setting of the motorcycle's headlight for normal nighttime riding.

Question 48

Oil filter

Accepted Answer

A device that removes impurities from the engine oil.

Question 49

Side stand

Accepted Answer

A retractable support that keeps the motorcycle upright when parked.

Question 50

Suspension preload

Accepted Answer

Adjusting the suspension to compensate for the weight of the rider and luggage.

Question 51

Throttle cable

Accepted Answer

A cable that connects the throttle grip to the throttle body, controlling the engine's speed.

Question 52

Wheelbase

Accepted Answer

The distance between the centers of the front and rear wheels.

Question 53

Chain tension

Accepted Answer

The amount of slack or tightness in the motorcycle's chain.

Question 54

Clutch cable

Accepted Answer

A cable that connects the clutch lever to the clutch mechanism, allowing for gear changes.

Question 55

Cooling system

Accepted Answer

The system that regulates the engine's temperature to prevent overheating.

Question 56

Gear indicator

Accepted Answer

A display that shows the current gear the motorcycle is in.

Question 57

Turn signals

Accepted Answer

Lights on the front and rear of the motorcycle that indicate the rider's intention to turn.

Question 58

Wind buffeting

Accepted Answer

The turbulent airflow experienced by the rider caused by wind resistance and motorcycle design.

Wyoming Motorcycle License Flashcards