Question 1

Anti-Lock Brakes (ABS)

Accepted Answer

Technology that prevents wheels from locking up, improving control during sudden stops.

Question 2

Countersteering

Accepted Answer

Act of pushing the handlebars in the opposite direction of a turn to initiate a lean.

Question 3

Three-second following distance

Accepted Answer

Minimum safe following distance to allow for reaction time.

Question 4

Blind spots

Accepted Answer

Areas where other vehicles can't be seen in rear-view or side mirrors.

Question 5

Buffering

Accepted Answer

Creating space between your motorcycle and potential hazards.

Question 6

Clutch control

Accepted Answer

Regulating the connection between engine and transmission to control speed and power.

Question 7

Downshifting

Accepted Answer

Changing to a lower gear to increase power for acceleration.

Question 8

Engine braking

Accepted Answer

Using the engine to slow down instead of applying brakes.

Question 9

Friction zone

Accepted Answer

Area in the range of the clutch lever movement where power is transferred to the wheels.

Question 10

High-visibility gear

Accepted Answer

Clothing and equipment designed to make a rider more visible to others.

Question 11

Intersections

Accepted Answer

Crossroads where 40% of all motorcycle collisions occur.

Question 12

Lane positioning

Accepted Answer

Using the full width of a lane to maximize visibility and avoid hazards.

Question 13

Lowside crash

Accepted Answer

Crash where the motorcycle slides out from under the rider due to a loss of traction.

Question 14

Over-braking

Accepted Answer

Applying too much brake, causing a skid.

Question 15

Progressive braking

Accepted Answer

Applying brakes gradually, using both front and rear brakes for maximum efficiency.

Question 16

Riding strategies

Accepted Answer

Techniques for dealing with various riding conditions and traffic scenarios.

Question 17

Slippery surfaces

Accepted Answer

Potential hazards including wet roads, gravel, and oil slicks.

Question 18

Throttle control

Accepted Answer

Using the throttle to regulate speed and engine power.

Question 19

Turning techniques

Accepted Answer

Techniques for safely executing turns, such as slow, look, lean, and roll.

Question 20

Under-braking

Accepted Answer

Applying too little brake, causing inadequate stopping power.

Question 21

Vision skills

Accepted Answer

Techniques for scanning the road and maintaining situational awareness.

Question 22

Weaving

Accepted Answer

Moving laterally within a lane, often to avoid debris or increase visibility.

Question 23

X-ing

Accepted Answer

A technique used to navigate around obstacles in the road, resembling the letter 'X'.

Question 24

Yielding

Accepted Answer

The act of letting others go first when merging or at intersections.

Question 25

Zone control

Accepted Answer

The process of managing the space around your motorcycle to maintain safety.

Question 26

Staggered formation

Accepted Answer

Formation used when riding in groups to maintain safe distances between motorcycles.

Question 27

Two-second rule

Accepted Answer

The minimum distance to maintain from the vehicle in front, in good weather conditions.

Question 28

Face shield

Accepted Answer

Part of the helmet protecting the face from wind, debris, and insects.

Question 29

Lane splitting

Accepted Answer

Riding between lanes of traffic, illegal in North Dakota.

Question 30

Road rash

Accepted Answer

Abrasions caused by sliding on the road surface during a crash.

Question 31

T-CLOCS

Accepted Answer

Acronym for Tires, Controls, Lights, Oil, Chassis, and Stands; a pre-ride inspection checklist.

Question 32

Collision avoidance

Accepted Answer

Techniques and strategies for avoiding collisions with other vehicles.

Question 33

Maximum braking

Accepted Answer

Applying the brakes to the limit without skidding, for shortest stopping distance.

Question 34

Off-road riding

Accepted Answer

Riding on unpaved surfaces, requiring different skills and techniques.

Question 35

Rain riding

Accepted Answer

Riding in the rain, which can decrease visibility and traction.

Question 36

Saddlebags

Accepted Answer

Storage compartments mounted on the sides of a motorcycle.

Question 37

Helmet laws

Accepted Answer

Legal requirements for helmet use. In North Dakota, riders under 18 must wear helmets.

Question 38

Night riding

Accepted Answer

Riding after dark, requiring enhanced visibility and awareness.

Question 39

Obstacle avoidance

Accepted Answer

Techniques for quickly steering around obstacles in the road.

Question 40

Passing

Accepted Answer

The act of safely overtaking and moving ahead of another vehicle.

Question 41

Quick stop

Accepted Answer

A technique to stop the motorcycle quickly and safely in an emergency.

Question 42

Roadway users

Accepted Answer

All those using the road, including drivers, motorcyclists, bicyclists, and pedestrians.

Question 43

Swerving

Accepted Answer

Rapid change in direction, usually to avoid a collision.

Question 44

Traffic laws

Accepted Answer

Laws governing road use, including speed limits, right of way, and signaling.

Question 45

U-turns

Accepted Answer

Making a 180-degree turn to reverse direction, often a challenging maneuver for motorcyclists.

Question 46

Visibility

Accepted Answer

Making sure you are seen by others, through use of lights, signals, and high-visibility gear.

North Dakota Motorcycle License Advanced Knowledge Flashcards