Question 1

ABS

Accepted Answer

Anti-lock Braking System helps prevent wheel lock-up during braking.

Question 2

BAC

Accepted Answer

Blood Alcohol Concentration measures the level of alcohol in a person's blood.

Question 3

Blind Spot

Accepted Answer

Area around a vehicle that is not visible to the driver's mirrors.

Question 4

Brake Fade

Accepted Answer

Loss of braking power due to overheating of the brakes.

Question 5

Camber

Accepted Answer

The angle of the motorcycle's wheels relative to the road surface.

Question 6

Carburetor

Accepted Answer

Device that mixes fuel and air for combustion in an internal combustion engine.

Question 7

Chassis

Accepted Answer

Frame of the motorcycle that supports the engine and other components.

Question 8

Clutch

Accepted Answer

Mechanism that engages and disengages power transmission from the engine to the transmission.

Question 9

Countersteering

Accepted Answer

Technique used to initiate a turn by briefly steering in the opposite direction.

Question 10

Crosswind

Accepted Answer

Wind blowing across the direction of travel, affecting motorcycle stability.

Question 11

Cruise Control

Accepted Answer

System that automatically maintains a desired speed without throttle input.

Question 12

Downshifting

Accepted Answer

Changing to a lower gear to decrease speed or prepare for a turn.

Question 13

Dragging

Accepted Answer

Riding with the brake lever partially applied, causing friction and heat buildup.

Question 14

Engine Displacement

Accepted Answer

Volume of the engine's combustion chambers, measured in cubic centimeters (cc) or liters.

Question 15

Forks

Accepted Answer

Front suspension components that support the front wheel and allow it to move up and down.

Question 16

Frame Slider

Accepted Answer

Protective device attached to the motorcycle's frame to minimize damage in a crash or slide.

Question 17

Fuel Injection

Accepted Answer

System that delivers fuel to the engine electronically, replacing carburetors.

Question 18

Gear Ratio

Accepted Answer

Relationship between the number of teeth on two gears, determining the speed and power delivered.

Question 19

Hesitation

Accepted Answer

Momentary delay in engine response due to incorrect throttle or fueling.

Question 20

Highside

Accepted Answer

A type of motorcycle crash where the rear wheel loses traction and the bike flips over.

Question 21

Kickstand

Accepted Answer

Device used to support the motorcycle in an upright position when parked.

Question 22

Lane Splitting

Accepted Answer

Riding a motorcycle between lanes of traffic moving in the same direction.

Question 23

Leaning

Accepted Answer

Tilting the motorcycle in turns to maintain balance and negotiate curves.

Question 24

MSF

Accepted Answer

Motorcycle Safety Foundation, an organization that provides rider training and promotes motorcycle safety.

Question 25

Pillion

Accepted Answer

A seat behind the rider, typically for a passenger.

Question 26

Pre-Ride Inspection

Accepted Answer

A systematic check of the motorcycle's components and systems before riding.

Question 27

Rev Matching

Accepted Answer

Technique of matching engine speed to the speed of the lower gear during downshifts.

Question 28

Saddlebags

Accepted Answer

Bags attached to the motorcycle for carrying belongings or equipment.

Question 29

Skid

Accepted Answer

Loss of traction between the tires and the road surface, often resulting in a slide.

Question 30

Sprocket

Accepted Answer

Toothed wheel connected to the engine and the rear wheel, transmitting power through the chain or belt.

Question 31

Squid

Accepted Answer

Slang term for an inexperienced or reckless motorcycle rider.

Question 32

Suspension

Accepted Answer

System of springs, shocks, and linkages that support the motorcycle and absorb road imperfections.

Question 33

Tailgating

Accepted Answer

Riding too closely behind another vehicle, reducing reaction time and visibility.

Question 34

Tank Slapper

Accepted Answer

A violent oscillation of the handlebars, often caused by instability in the front end.

Question 35

Throttle Control

Accepted Answer

Skill of smoothly modulating the motorcycle's engine power.

Question 36

Torque

Accepted Answer

Rotational force produced by the engine, contributing to acceleration and pulling power.

Question 37

Traction Control

Accepted Answer

System that prevents wheel spin by adjusting power delivery or braking.

Question 38

Trail Braking

Accepted Answer

Technique of continuing to brake while entering a turn, gradually releasing the brakes.

Question 39

Triple Tree

Accepted Answer

Component that connects the front forks to the frame and holds the handlebars.

Question 40

Understeer

Accepted Answer

Situation where the front tire loses traction, causing the motorcycle to continue straight instead of turning.

Question 41

Valve Clearance

Accepted Answer

The gap between the valve stem and the rocker arm, adjusted to ensure proper engine performance.

Question 42

Visibility

Accepted Answer

The ability of other road users to see and perceive the presence of a motorcycle.

Question 43

Wheelie

Accepted Answer

Lifting the front wheel off the ground by applying throttle and shifting weight.

Question 44

Wind Chill

Accepted Answer

The cooling effect of the combined temperature and wind speed on the body while riding.

Question 45

Work Zone

Accepted Answer

An area of a road where construction or maintenance is being performed, requiring caution and reduced speed.

Question 46

Yaw

Accepted Answer

Side-to-side movement of the motorcycle caused by uneven weight distribution or external forces.

Question 47

Tank Bag

Accepted Answer

A small bag attached to the motorcycle's fuel tank for storing items within easy reach.

Question 48

Road Rage

Accepted Answer

Aggressive or violent behavior exhibited by drivers towards others on the road.

Question 49

Spark Plug

Accepted Answer

Device that ignites the air-fuel mixture in the combustion chamber.

Question 50

Quick Release

Accepted Answer

Mechanism that allows for easy and quick removal of certain motorcycle components, such as seats or windshields.

Question 51

Odometer

Accepted Answer

Instrument that displays the total distance traveled by a motorcycle.

Question 52

Neutral

Accepted Answer

The gear position where the engine is disengaged from the transmission, allowing the motorcycle to roll freely.

Question 53

Lowside

Accepted Answer

A type of motorcycle crash where the front or rear wheel loses traction, causing the bike to slide out.

Question 54

Helmet Laws

Accepted Answer

State regulations requiring motorcycle riders to wear helmets for safety.

Question 55

Grip

Accepted Answer

The level of traction between the tires and the road surface.

Question 56

Fuel Gauge

Accepted Answer

Instrument that indicates the amount of fuel remaining in the motorcycle's tank.

Question 57

Exhaust System

Accepted Answer

Components that route and control the flow of exhaust gases from the engine.

Question 58

Defensive Riding

Accepted Answer

Riding technique that emphasizes anticipation, awareness, and proactive measures to avoid accidents.

Question 59

Counterbalance

Accepted Answer

Mechanism or technique used to offset vibrations or imbalances in the engine or motorcycle.

Question 60

Chain Maintenance

Accepted Answer

Regular cleaning, lubrication, and adjustment of the motorcycle's chain drive system.

Question 61

Apex

Accepted Answer

The point of the tightest corner in a turn, where the motorcycle should be closest to the inside of the curve.

New Jersey Motorcycle License Flashcards